Відео

When the screw holes are aligned with each other ...that they will fit only where they can .....whats the need to align the toothbaldes......could you explain..

i love this video. I have the Moser 1400 and the power screw seems to work in the opposite way: clockwise the noise calms down (the screw goes in) and anticlockwise the noise becomes higher (and the screw comes out). However, your model is really silent, while mine only change from noisy to extremely noisy, there is not the clear separation from "silent" and "oh, it starts screaming now"

This should be the official WAHL tutorial. I appreciate the thoroughness and detail.

You are fabulous!! Love the instructions ... and your voice tone... fantastic....! Thank you for the help....

I was on 1 blade short from going bald and going to the shop looking like the 3 stooges I was determined and fixed and oiled it up like new thanks

This was perfect!

Had to come back to the video , got to remember the basics sometimes!!

thank you so much. I should have watched this video long ago.

big suprise. they still suck

My question is about the left/right alignment of the bottom blade. The top blade moves left and right, and each time you switch on the clippers then switch it off, the top blade doesn't stop in the same position every time. So when aligning the bottom blade, how do you account for this? What position of the top blade do you go off to set the bottom blade? Thanks

Thanks man. This has been useful

Wahl done my friend.

Turns out that I've been zero gapping for years without knowing , thought clippers were not set right out the box as standard and by common sense, thought we all had to adjust them ourselves 😂, so I did,

He should have spoken clearer, louder, and slower rather than mumbling.

Tysm man😭🙏 I went to clean my clippers and uninstalled the blades and went to put it together… turns out I installed it inverted so the blades kept rubbing against each other making a loud noise😂 again thank you I realized mid way my mistake

I have one clipper that’s zero gapped all the way to the end of the stationary blade to erase trimmer line and the rest of my clippers are like yours

Cheers!

Sweet as, Bruv.

Nice work ❤

Thanks for this information. Hopefully my trimmer won't rip my hair out like last time! 😂

Thanks, you saved me money that I didn't have to spend. #lifesaver

Thank you buddy one year problems👍👍❤

So guys I am glad that it is faking he is a very gay person kook that not How's it works

Ty You helped me soo much

This was the clearest explanation and visual for blade alignment video I have found. Thank you. It helped a great deal……

Boss mgkano b reasor na gaya sau boss

First tooth of stationary blade doesnt lie on second of moving one yet it cuts alright. But how to trim without scratching on beards skin?

nice video

Lawareshlashmacenepostofficecontrolefoodignouprivateuneversety

Thank you for the cleaning and alignment advice. Does anyone know how to get a replacement for a damaged foam hair filter? Is that really necessary or is it OK to operate the device without one?

Top notch video.

Yo mate, I was having an issue with my clippers. I watched your video and followed what you said to do. It's late now to be making clipper noises, so I will update you in 2 days.

Be careful people. If you adjust the blades too close, you will cut yourself badly. Otherwise, great video.

UP THE WAHS!

Oh that's a good tip with slightly tightening each screw in an alternating fashion. I kept moving the damn blade when trying to tighten it down. Very nice video.

My little son threw my on the floor and cutting blade shifted off it position and when I try looking into it, it fell off. Loosing the blades I noticed the foamy is torn and the white rubber/plastic have receded inside that the cutting blade can't latch on it. What do I do to fix it and align the blades again?

Whats the model

Thank you for your help today

Prices of cliffers

God bless you bro. Just got it. Shaved, bathed and now in Church. This is my 1st time resetting the blades of my clipper myself. And the problem was that the lever didn’t lap well with the new blades grove. So I trimed the lever a bit. Made it ever all the way, then when i screwd it tight it didn't lap. Then i loosed it and made it sit on the lever and carefully placed the blades and screwed gently to hold and reposition the little blades untill they lapped as you showed us the teeths should lapped then tightened and started it and the blades didn't fall off this time as did after the vendors set it themselves. But then it made a loud noise then i screwed the voltage screw up n down till the sound was gentle n smooth. Then shaved the hair on my hand to make sure its working ir did. Then shaved myself neat and jumped in n out the bathroom n out to Church. Just singing the Entrance him now b4 the Priest comes in. Took me about 45mins to sort it. Got it on the 3rd time. Almost gave up cos was running late to Church. Thanks to you i look good on my bday.

Thanks a lot brother for this well explainatory clear visual tutorial. So so helpful. Will go practice it now. They fixed it for me where I bought the blades but coming back home to use it turning it on the inner blades kept shifting. So watching this video whilst eating, now i have courage to DIM. Thanks again bro. It's my bday today "Sunday". Not had time all week to go to the barbers n still don’t even have time today "my bday" as it is the deadline for some assignments i have to submit" but i still want to look good on my day. Thanks again. Will let you know when it works. Cheers. Just about to take a shower n head to Church.

I have a special needs son and hair cuts are a chore, my clippers got loud and were scaring my son. The tip on changing the voltage is a life saver, I was about to replace my clippers. Thank you.

Walh clippers seem a little temperamental, imho. I think i am going to shop for ky next set, that does not have that adjuster arm. Im more than happy with guard attachments to give my desired hair length

Not gonna lie beginner barber here I js lost my damn screw and it buzzed I did what u did that shit buzzed more 😂 I’m lokey pissed

Bom😊😊😊😊

Wow its already been a year since he posted 😔

Sigh - "..With the lever fully closed.." so is that move it to the closest or longest cut? You move it to both extreme so its not clear which one its supposed to be

Thanks brother, almost gave myself a vasectomy with the way I had tightened it

Thanks a lot. After doing mine, i was having doubts (never been taught or seen someone do it before). Glad I'm on track

Right on. Thanks for the info. Easy.